Integrated Product Engineering Sample

Integrated Product Engineering Sample

Question:

This Assignment assesses the following module Learning Outcomes (from Definitive Module Document):
To enable the students to:

  1. Explore product development in a business context in terms of the product specifications, standards,life cycle assessment and functions of manufacturing industry;
  2. Reflect the need for high ethical conduct in the context of product development;
  3. Analyse competitive forces influencing product and business decisions;
  4. Evaluate alternative product strategies individually and/or in a group.

They must have touch-screen face that allows patients to record messages and send them to doctors. It must limit the amount of direct contact doctors and nurses have with coronavirus (COVID-19) patients, thus reducing the risk of infection. Also, they must help the hospital to limit the number of personal protective equipment (PPE), such as protective masks, gloves and gowns that staff have to use. In addition, it must not subject to exhaustion. With a quick charge of batteries, they should be back at work in the ward.

ORDER A PLAGIARISM-FREE PAPER HERE

They are to be used by top medical management personnel or medical doctors, working in health sector that deals with incidence of critical COVID-19 pandemic cases, among other medical issues. SFS-20+ devices are expected to possess some important features to be able to serve the sector effectively; hence to be smart/intelligent face shields indeed and in terms of functionality. The user must be comfortable with the use of this personal protective equipment (PPE) within and outside the hospitals, care homes and among other care centres/offices, whenever and wherever responsibility or duty calls. The smart SFS-20+ must appear as a normal/common PPE to avoid unnecessary  attraction and/or distraction from the patients.
Specifically, you are required to give a technical presentation introducing the ONLY ASSIGNED new product, using QFD. Research and use the following six basic steps recommended for building the House of Quality:
(a) identify what customer wants (state up to 10 possible customer needs for assigned product ONLY,
(b) identify how the product will satisfy the customer,
(c) identify relationships between ‘how’s’,
(d) develop importance ratings,Integrated Product Engineering Sample
(e) evaluate competing products or services, and
(f) determine the desirable technical attributes.
Your individual power-point presentation must be limited to a maximum of ten (10) minutes duration and a maximum of ten (10) slides, excluding Title Page, List of References and Appendix Slides. Presentations shorter than the allowable duration and slides will NOT lose marks, but may lead to the omission of important material or information. Any presentation over the specified maximum duration of 10 minutes and 10 slides will be stopped at 10 minutes and 10th slides, respectively and the rest of the slides/presentation will be ignored, not marked. Also, materials in appendix will NOT count for marks and they should not exceed 2 slides in length.
Note that as a part of the presentation, you need to come-up with a title for the case study and it should appropriately capture your product engineering task. The title should simply draw attention of the reader/listener to your work. It should clearly represent the work presented.
Ensure that your power-point presentation is well-structured.
Take advantage of adding voice-over to your presentation, by ensuring that the key points are clearly discussed and the presentation captures the audience’s attention.
A note to the Students:

  1. For undergraduate modules, a score above 40% represent a pass performance at honours level.
  2. For postgraduate modules, a score of 50% or above represents a pass mark.
  3. Modules may have several components of assessment and may require a pass in all elements. For further details, please consult the relevant Module Guide or ask the Module Leader

Integrated Product Engineering Sample

 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Transportation Systems Discussion

Transportation Systems Discussion

To illustrate the importance of transportation in our national life, identify a transportation-related article that appears in a local or national newspaper.
Submit a 1-page, single-spaced (max. 500 words) response explaining the transportation-related issues and explain why the article is newsworthy. In your writing, make sure you comment not only on the transportation concepts identified but also on any social, environmental, or policy decisions discussed in the articles. Apply course content related to transportation system components and any applicable transportation key points. [20 points]Transportation Systems Discussion

ORDER A PLAGIARISM-FREE PAPER HERE

Please include the title of the article, the author, and the source, as well as attach a pdf of the article. Please add an active link to the article, and include your references

To illustrate the importance of transportation in our national life, identify a transportation-related article that appears in a local or national newspaper.
Submit a 1-page, single-spaced (max. 500 words) response explaining the transportation-related issues and explain why the article is newsworthy. In your writing, make sure you comment not only on the transportation concepts identified but also on any social, environmental, or policy decisions discussed in the articles. Apply course content related to transportation system components and any applicable transportation key points. [20 points]
Please include the title of the article, the author, and the source, as well as attach a pdf of the article. Please add an active link to the article, and include your references  Transportation Systems Discussion

 

 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Engineering Assignment

Read the following:

  • Chapter 2: Law, Critical Thinking, and Good Communication
  • Chapter 3: Tort Law
  • Additional resources: http://www.nolo.com/http://www.findlaw.com/http://www.wikipedia.com/.
    There is a tremendous amount of high quality information that will help you with your assignment below, but do not simply copy text! You must use your own words. Use these websites as a start:  Explore the free resources of the Web.

Free Answer questions:

1. 2020 has had a lot of discussion about the “Rule of Law.” What is the “Rule of Law,” and what do you think are the alternatives to it? Why is it important to understand that America is governed by the “Rule of Law?”

2. What does “liability” mean to you? What do you think is required prior to holding someone “liable” for something?

Short answer questions:

3. What does “intent” mean?

4. What is a “battery” in the legal sense of the term?

5. What are the four steps of the IRAC method for analyzing legal problems?

Hypothetical (Do the best you can):

6. Shane and his friend Mark were sitting in front of Shane’s house on a Saturday morning. At some point, Shane reached out and lightly kicked Mark’s big toe. Mark’s only reaction was to get up and chase Shane around the front yard for a few minutes before the boys found something else to do. But three days later, Mark’s toe had swelled to double its size, and he had to go to the emergency room. Stumped for reasons, the doctor asked Mark whether he could remember anything that might have caused an injury, and Mark mentioned Shane’s kick. Discuss whether Shane (or actually, his parents) might be liable for Mark’s injuries

 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

If The Beam Will Fail In The Static, Initial Loading Case

The ultimate objective of this problem will be to determine whether it is safe for this beam to operate. First the static (load applied once) case should be assessed, while the repeated loading case is given as a bonus question.

The drawing below depicts a machined AISI 1020 steel beam with a rectangular cross-section that is undergoing a cyclic load. The load, F, varies from 250 N to 500 N under each cycle. The material’s ultimate tensile strength, Sut, is 470 MPA. The beam is rigidly supported at the wall. Points A and B are just to the right of the wall. A is at the bottom of the beam. B is at the center of the beam. C is immediately adjacent to the notch and at half of the length. The notch is a half-circle extrusion and its diameter is 2 mm.

L = 500mm; w = 20mm; h = 40mm; for a square cross section, I = w*h^3/12; and transverse shear a square cross section, tau_max = 3/2*V/A

 

8.1 Draw a free body diagram of the beam, exclude the wall, label axes (4 pts) – upload in file

8.2 Indicate the stresses acting on stress elements at points A and B (assume they are in the center of the beam with respect to width although this should not affect your results). Draw x-y plane stress elements. (8 pts) – upload in file

8.3 Calculate the Von Mises stress at points A, and B then report the higher value. (8 pts) – calculated in this question

 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Paper

Discussion Question 1: Define data mining. Why are there many names and definitions for data mining?

Discussion Question 2: What are the main reasons for the recent popularity of data mining?

Discussion Question 3: Discuss what an organization should consider before making a decision to purchase data mining software.

Discussion Question 4: Distinguish data mining from other analytical tools and techniques.

Discussion Question 5: Discuss the main data mining methods. What are the fundamental differences among them?

Exercise #1: Visit teradatauniversitynetwork.com. Identify case studies and white papers about data mining. Describe recent development in the field of data mining and predictive modeling.

 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Engineering homework help

PLEASE SEE WORKSHEETS BELOW NEED THEM COMPLETED AS SOON AS POSSIBLE!
  • attachment

    IMG-8662.JPG
  • attachment

    IMG-8659.JPG
  • attachment

    IMG-8657.JPG
  • attachment

    IMG-8665.JPG
  • attachment

    IMG-8660.JPG
  • attachment

    IMG-8656.JPG
  • attachment

    IMG-8661.JPG
  • attachment

    IMG-8658.JPG
  • attachment

    IMG-8663.JPG
  • attachment

    IMG-8666.JPG
  • attachment

    IMG-8667.JPG
  • attachment

    IMG-8664.JPG
 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Engineering homework help

Main topic is Strategic Management. In this topic,we can see ”low cost”, ”differentiation”, ”strategic  integration” ”porters generic strategies”.
I want to get data analysis and comparing companies with lists, chart,and figures. Based on Strategic management.
For example; you will pick a market, then you are going to search their strategies and compare with themselves eachother. It needs to be at least one example for Porters generic strategies. One example for low cost, One example for differentiation etc etc.
It needs to be 10 pages. On WORD PAGE, New Times Roman and 12 punto.
 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Telecommunications Engineering homework help

What does an assessor need to understand before she or he can perform an assessment?
 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"

Engineering homework help

Main topic is Strategic Management. In this topic,we can see ”low cost”, ”differentiation”, ”strategic  integration” ”porters generic strategies”.
I want to get data analysis and comparing companies with lists, chart,and figures. Based on Strategic management.
For example; you will pick a market, then you are going to search their strategies and compare with themselves eachother. It needs to be at least one example for Porters generic strategies. One example for low cost, One example for differentiation etc etc.
It needs to be 10 pages. On WORD PAGE, New Times Roman and 12 punto.
 
"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!"